Maker's Toolkit

Professional portable 3D scanners for reverse engineering, quality inspection, and digital archiving. From the entry-level INSPIRE 2 to the industrial Trackit SR.

Four-spool filament dryer with 70°C max temp, active circulation fan, and touchscreen control. The go-to dryer for multi-material print farms.

High-temp filament dryer reaching 85°C with dual-spool capacity and a built-in annealing mode for post-processing strength.

The premium bed adhesive that works across PLA, PETG, ABS, TPU, and nylon. One stick lasts 100+ prints. Releases cleanly when the bed cools.

Essential upgrade for abrasive filaments. A set of 0.2, 0.4, 0.6, and 0.8mm hardened steel nozzles covering every print resolution you'll need.

The single most-used tool on any 3D printing workbench. Measure filament diameter, calibrate steps, check part tolerances, and verify print accuracy.

Remove brim remnants, smooth sharp edges, and clean up support scars. A deburring tool plus a set of needle files covers 90% of print cleanup.

Safe bed scraper with flexible stainless steel blade and plastic handle. Removes stuck prints without gouging your PEI or glass build plate.